Decorative Metal Fencing prevents rodents and small animals from entering your farm. It also adds decorative details. Metal fittings are packed in boxes and delivered to the home ready for installation. Screw the fence inserts hats to the top of the fence posts by hand (or as shown in the instructions that came with your kit). Measure and dig insert holes for installation fence, using a post whole holes and tape measure. Dig the holes at least 6 inches deep and about 5 inches wide. Insert fence posts into the holes and shovel dirt around them to keep the metal fencing insert in place.
Level the post with a water pass and fill the rest of the post with the concrete. Level fence posts, using water pass again, adjust if necessary to get the item to a perfect level orientation. Let the cement dry and see. Attach Decorative Metal Fencing sections to the fastened hardware bars that came with the kit. Each metal fence has a few different tool fittings, but most require a screwdriver to attach a screw and an angle bracket. Metal fence rusts over time if it is not protected from weather and wind leaving your farm with a foul. Painting your rusty fence can liven up your yard and just require some extra time and effort than painting a fence without rust.
15 Photos Gallery of: Decorative Metal Fencing Ideas
Help avoid future rust by painting the fence with two layers of outdoor paint to protect it from weather and wind. Scratch any loose rust away from the Decorative Metal Fencing with a steel brush. Paint rusty parts of the fence with a rust converter and allow it to dry, which may take two to four hours. A rust converter takes place a primer and converts rust to a protective black layer. Paint the fence with a layer of outdoor paint and let it dry, which may take four to six hours. Paint a second layer of outdoor paint on the fence for extra protection and a bold color.