Ideas For Make Wooden Bench Swing

Small Wooden Bench Swing

Wooden bench swing – wooden bench changes can be a beautiful addition to your garden or patio. You can easily make yourself with treated wood, some chain and four carbine hooks. Be sure to use treated wood for any outdoor project, as it is resistant to rot and will deal with the elements better than untreated wood. These instructions are for ideas for make wooden bench swing that measures 24 inches long and 16 inches wide. But you can adjust the measurements and make a bench swing any size you want.  Buy planks and strips of treated wood and have them cut to size for you at the wood goods store.

READ  Affordable and Look Fashionable Wooden Crate Bench

Then ideas for make wooden bench swing, sand and stain wood planks and strips with exterior wax, gel or liquid stain. Remove all sanding debris before applying the stain. Let the finish dry and apply a layer of wood sealer for added protection. Place the two planks, side by side and face down on the work surface. Make sure the edges are flush. Place two of the wood strips 3 inches from the ends and perpendicular to the boards. Place the third wooden strip in the center, also perpendicular to the boards. Fix the table setting with cover screws. Drill pilot holes before inserting the screws.

READ  Choosing Wooden Benches For Outside

Flip the bench over and drill 1-inch holes for the chain along the sides of the boards. You will need two holes on each side of the bench to help your swing hang straight. Place a hole in the center of each plank, between the support fit and the end of the board. Pass a piece of string through a hole in one side of your swing and up through the other on the same side. And the last instructions for make wooden bench swing wrap the opposite end of the chain on a hook on a branch of a thick tree and use two other cabinetmakers to secure it in place.