Outdoor gas lamps, either near the access path to the front door or near your driveway, will add a touch of Old World atmosphere and charm to your home. Use your gas lamp properly to ensure that it will last for many years. Clean your lamp periodically to maintain its appearance, and while cleaning it, inspect your lamp for wear and tear. Ideas for use outdoor gas lamps in a front yard. Open the gas half to ignite the flame. Sometimes this will involve turning a valve, other times it can be a screw slot valve. Turn on the ignition device, if it exists.
Adjust the flame by turning the gas valve. For a smaller flame, lower the gas. For a larger flame, increase the amount of gas reaching the tip of the burner. The flame may come out during this process; if so, repeat steps 1 to 3 again to restart. Light the flame when it is done by turning off the gas. Your gas lamp may take several seconds to arrive, while the gas from the line of clearance. If you’re outdoor gas lamps do not turn off, you will have to locate the gas supply shut off valve for the lamp, or the shut-off valve for the entire house.
15 Photos Gallery of: Outdoor Gas Lamps in a Front Yard
Look out the front window on windy nights to check that your gas light will remain on. Most gas lights are designed to withstand the wind to a point, but during storms and times of strong wind their light it can go off. If the light does not stay on during this time, you will know that you should not turn it on during a wind or rain storm in the future. Pour a small amount of a mild detergent or cleaner into the home in a bucket of water. Clean the gas lamp with its wet cloth. Clean the gas lamp again, then rinse and drain. Continue this process until the cloth no longer clears the dirt from the outdoor gas lamps.shakespeare gas lamp, restore gas lighing front yard detroit